The design of the heating installation is based on the greenhouse surface area 26.284,8 m² and the future phase with a surface of 12.076,8 m².
The greenhouse project consists of a total of 6 climate zones with one central corridor and none service building zones. In the greenhouse each climate zone is provided with a floor, grow tube and upper heating system with gable heating system behind the outside gables. Also the greenhouse is provided with a CO₂ dosing installation connected to the existing CO2 tube. The first trellis is 16 meter. In this trellis is an pathway.
We deliver and install 1 traditional 3 pass boiler, make: Crone, including a Zantinhg gasburner and flue gas condenser.
The heating installation consist of a high temperature transport line circuit from the existing manifold to the new greenhouse.
The six heating departments in the greenhouse will be provide with a concrete floor heating system of 42 pieces PE hose ø 25x 2,7 mm, per 12,8 mtr. center to center 300 mm, connected to the high temperature transport line.
The hoistable grow pipe heating system of 16 tubes Forcas ø 35 x 1,20 mm. per 12,8 mtr. The grow tube is mounted in the lifting installation.
The upper heating consists of 6 heating tubes Ø 76 x 2,25 mm per 12,80 meter trellis
The middle walk way / corridor heating consists of 6 tubes Ø 51 x 2,25 mm high mounted in galvanized rings at the lower trellis beam
The walk way in the first trellis heating consists of 6 tubes Ø 51 x 2,25 mm high mounted in galvanized rings at the lower trellis beam.